Project 240SX – Installing EVO X Brakes

This post has been moved to it’s new permanent home at My Pro Street, where they have purchased the intellectual rights to this article. If you have a how to site and want to make some spare cash check them out. Click here for the full article.

Click here for the How To upgrade your 240sx brakes

Click here for the How To upgrade your 240sx brakes

For the time being, we will be using a Centric 300zx brake master, part number 46010-30P22 for a master cylinder bore of 17/16th. However due to the ever elusive third brake fitting, we opt for a banjo bolt solution instead.

By using a m10 banjo bolt fitting, we install another Russell 65702 – banjo straight to 10mm female -3 and another Aeroquip FCM2945 – -3 male to 10mm x 1.0 inverted flare to go to the passenger side front brake.



19 thoughts on “Project 240SX – Installing EVO X Brakes

  1. Pingback: Project 240SX – Oh… the Irony…. | StockSpyder

  2. damn, very nice set up. i’m about to put same rims on my 13 but 4 lug, and was just curious what coils you have, and if you had to raise the car for the wheels to fit. thanks

    • I am running Megan Track Coilovers and no, no need to raise the car to clear. You will need the driver side harness lifted, but I’m sure you knew that. Thanks for chiming in!

    • Hey Benji, you may or may not be able to run the IX calipers on a X rotor, but I was unable to on my Cryo Centric rotors, as they were oversized compared to the IX units. The skullworks bracket is steadily available, you can check places like Z1 motorsports, Enjuku or of course Pro Street Online.

      Thanks. take care and good luck on your project.

  3. Hi John. Where did you get the Skullworks caliper adapters from? I’ve been searching the net but can’t find them. Any help would be appreciated. Cheers from Down Under! – Josh

    • Hey Frankie, give either of those links a call even if they arent on the website I know those skullworks brackets are sold.

      This would be a great upgrade to your Z32, these Evo Brembos really stop!

      Good luck to you and your project!

  4. Hi there friends, how is the whole thing, and what you would like
    to say regarding this piece of writing, in my view its
    in fact remarkable in support of me.

  5. My brother suggested I may like this blog. He was entirely right.

    This submit actually made my day. You cann’t imagine just how a lot time I had spent for this info! Thanks!

  6. Hey there, You’ve done an excellent job. I will definitely digg it and personally suggest to my friends. I’m confident they’ll be benefited from this website.

  7. I’m not that much of a internet reader to be honest but your blogs really nice, keep it
    up! I’ll go ahead and bookmark your website to come back later. All the best

      • You can run oem s14 brake lines, they will bolt up as well. Had an issue with the evo lines and tried them. Thanks for the help, I’m running evo9 brembos up front. Sti brembo calipers with 300zx rotors in the rear. Sti brembos bolt up in the rear, just need a spacer. Thanks again.

  8. Pingback: NJ Evo x Brembo Calipers - Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s